ABC Southern California Continuing Education Schedule Janurary Thru June 2022

Continuing Education Schedule January thru June 2022 New classes may be added to the schedule at any time and all class dates listed in this brochure are subject to change. Visit www.abcsocal.org for the most current. ®

® 2022 Continuing Education For more information. 2 JOURNEYMEN TRAINING FEE CONTRIBUTION LANGUAGE How are contributions paid for journeymen and what benefits do they receive? On all public construction projects, the participating employer will contribute for all hours worked by journeymen in the selected trade classifications at the rates specified in the applicable training standards. Journeymen contributions are not required on private projects, but they can be accepted. Participating employers are encouraged to recommend an unlimited number of journeymen to attend any scheduled journeyman upgrade training course. This benefit is only available to journeymen for which training contributions are paid to the trust fund. Are employers responsible for ensuring that journeymen, for whom training contributions are paid on public works projects, take continuing education courses? Yes. If contributions are paid on behalf of journeymen, for work performed on a state public works project, the employer must ensure that the journeymen take continuing education courses through the trust fund. Failure to ensure the journeymen take courses could lead to prevailing wage compliance problems and penalties. Qualifying classes are available through the trust fund at no cost to the employer or journeymen for whom training contributions are paid. How and who is responsible for registering journeyman for continuing education courses? What happens if the journeyman is registered but does not attend? Either the contractor / employer or the journeyman can register the journeyman for classes on our website abcsocal.org under continuing education classes. If the journeyman does not attend then training, credit cannot be provided and the contractor / employer is responsible for payment of non-cancellation fee.

January - June Schedule • Premier Education and Professional Development Opportunity • Developed by experienced contractors & Kirk Alter, a nationally recognized expert with decades of experience • Designed Specifically to meet the needs of today’s contractors. • Rapid paced course focused on project management essentials. ABC PROJECT MANAGEMENT INSTITUTE (PMI) Instruction is done in two non-concurrent 40-hour sessions with an interim period between classes for applied assignments and reporting. Classes are in session 8:00am through 9:00pm and include a welcome dinner and a closing graduation banquet. Who Should Attend? Owners, project managers, estimators and any employee involved in managing projects. Why Attend? • Learn tangible tools to improve profitability, productivity, quality and customer satisfaction. • Experience real-world applications through interactive, project management courses and contractor case studies. • Obtain management tools that will positively impact their company. Course Modules (including, but not limited to): • Budgeting • Total Quality Management • Make the Contract Work For You • Managing Change on the Project • Profitability in Planning & Scheduling • Project Turnover • Get Ahead and Stay Ahead—Frontloading • Keeping Score –Tracking & Logging Course Details: • The Project Management Institution is 80 hours of instruction in two non-concurrent 40-hour sessions with an interim period between classes for applied assignments and reporting. • Classes are in session Tuesday – Friday from 8:00am through 9:00pm with a welcome dinner and reception and a closing and graduation banquet. • Class size is limited to provide an interactive experience and to allow the faculty to be fully available to the attendees. • Increasing Profit through Standardization • Pre-Fab & Profitability • Everybody Sells • What’s the Bottom Line? • Project Building Blocks: The Estimate • Using Technology to Gain Profit • The River of Life - Cash Flow • Winning the Change Order Game • Effective Project Correspondence • Negotiation Strategies & Techniques • Managing Vendors & Subcontractors • Short Interval Scheduling • Materials Management • Keeping Score - Labor Costs & You • Safety = Lives, Health, Profitability • Mobilization & Site Planning Session 1: August 15-19 • Session 2: October 4-7 ABC SoCal • 1400 N Kellogg Dive Anaheim, CA. 92807 For registration go to our website www.abcsocal.org. For questions or more information contact Ana Hernandez at: ahernandez@abcsocal.net or call: 714-779-3187 3

® 2022 Continuing Education For more information. TABLE OF CONTENTS CONTINUING EDUCATION CLASS CATALOG Category Page Journeymen Training Fee Contribution Language................................... 2 ABC Project Management Institute (PMI).................................................... 3 Registration, Cancellation and Payment Policies.................................... 5 Class List by Category.............................................................................................. 6 Class Schedule...................................................................................................... 7-15 ABC History and Milestones............................................................................. 16 Staff Directory............................................................................................................ 17 Meet Our Instructors...................................................................................... 18-19 Register online at abcsocal.org 4

January - June Schedule 5 CONTINUING EDUCATION CLASS REGISTRATION, PAYMENTS AND CANCELLATIONS How to register for a class Register for all classes online at www.abcsocal.org click on Continuing Ed classes, find the class that you want to register for and click on Register, follow the steps. Registration will be completed once payment has been processed. Make sure you select the correct ticket at check out. The tickets are Member, Non-member, SE (contribute to the trust fund, use our apprentices for prevailing wage jobs) or ABC Employee. If you need assistance with the registration process, please contact us at (714) 408-7608 By Registering for the Continuing Education classes You Are Agreeing to the Policies Below: Virtual classes: Attendee will receive a Zoom link and login information, a day before the class start date via email. In-House classes: We have 3 different locations; Anaheim, San Fernando and Riverside. Make sure you attend the location you signed up for. Non-member/self-pay: Class fee is due at the time of registration. Member Rate: Applies to Aluminate, ABC SoCal members and their employees that are in good standing. Class fee is due at the time of registration. Subscribing Employers known as (SE): If you are a contractor who pay training fees to the trust and is in good standing, you may be eligible for free seats. Contact us to verify if you qualify for free seats. No Show Policy: Class fee will apply if attendee does not show up to class. Employer will owe the class fee. Cancellation Policy: Cancellation request must be received in writing 3 business days before the class start date. Send email to continuinged@abcsocal.net Low Enrollment ABC SoCal reserves the right to reschedule or cancel any courses within 48 hours of the scheduled date due to low enrollment. Contact person and attendee will be notified by email of any changes.

® 2022 Continuing Education For more information. COURSES BY CATEGORY Trade Related Courses • Advance Estimating • Advance Electrical Blueprint Reading • Back Flow Prevention • Basic Lighting Control • Basic Motor controls • Blue Beam Revu 2020 Basics • Blue Beam Revu Takeoff & Estimation • Blueprint Reading for Plumbers • Building Inspector Certification B-1 residential • Building Inspector Certification B-2 commercial • Computer Fundamentals of Construction workers • Conduit Bending • Construction Foremanship • Contractors Law & Business • Electrical Blueprint Reading • Estimating 101 • Fundamental of Crew Leadership • Grounding and Bonding • HVAC Blueprint Reading • Intro to General Blue print reading • Intro to Low Voltage • NEC Calculations • NEC Review • Plumbing Code for Journeymen • Stake Reading • VDV Low Voltage Review 6 OSHA/SafetyTraining • Arc Flash Safety & NFPA 70E in person • Arc Flash Safety & NFPA 70E on line • Boom Lift Certification MEWP ANSI A92 • Confined Space • Competent Person/Excavation Safety • CPR/First Aid w/ AED • Fall Protection • Forklift Certification MEWP ANSI A92 • Qualified Rigger & Signal Person • Safety Certifications and Recordkeeping • Scaffolding Safety • Scissor Lift Cert. MEWP ANSI A92 • Traffic Control Flagging Management Training • Advance Mechanic’s Lien • Contract Seminar • Mechanic’s Lien • Prevailing Wage Seminar • Project Management • Skill & Training Workforce Requirements

January - June Schedule Advanced Conduit Bending (Saul Aquino) [8 Hrs.] (Days: 2) This class will cover Hydraulic bending, Rigged bending, with a Chicago bender. Student will develop a better understanding of the formulas used in conduit bending. On the second day you will get hands on training with a 1 ½ “conduit. Must bring your own PPE. Member - $350, Non-Member - $450, SE – Free Wed, 1/19/2022 & 1/26/2022, 5:00PM-9:00PM {Anaheim} Tue, 5/24/2022 & 5/31/2022, 5:00PM – 9:00PM {San Fernando} Advanced Electrical Blueprint Reading (Bill Petry) [8 Hrs.] (Days: 2) Learn to collaborate the NEC with the project plans to better understand how to lay out electrical enclosures using submittals and job specifications. Students will also learn to read single line diagrams, identify conflicts, and how to resolve those conflicts. Member - $350, Non-Member - $450, SE - Free Wed, 2/16/2022 & 2/23/2022, 5:00PM - 9:00PM {Anaheim} Tue, 5/10/2022 & 5/17/2022, 5:00PM - 9:00PM {Anaheim} Advanced Mechanic’s Lien Seminar (Theresa Crawford) [3 Hrs.] (Days: 1) For those that have attended the Basic Mechanics Lien class. Covering new laws, effect of bankruptcy, and foreclosures on your lien rights, sample forms, and much more. Member $75, Non-Member $175 ~ Does not qualify for free seats~ Fri, 3/18/2022, 9:00AM - 12:00PM {Virtual} Fri, 5/20/2022, 9:00AM -12:00PM {Virtual} Advanced Estimating (John Hamo) [6 Hrs.] (Days: 2) You will learn how to create and set up a project in the estimating software, import plans, complete a digital takeoff and recapitulate the bid and create a winning proposal. Member - $200, Non-Member $300 SE – Does not qualify for free seats~ Thu, 3/3/2022 & 3/10/2022, 5:00PM – 8:00PM {Anaheim} Thu, 6/2/2022 & 6/9/2022, 5:00PM – 8:00PM {Anaheim} Arc Flash & NFPA 70E Safety Training (Creation World) [16 Hrs.] (Days: 4) The course focuses on safety-related work practices, maintenance requirement, and safety requirements for special equipment, as well as establishing an electrically safe work environment, hazard identification, risk assessment, and selecting appropriate (PPE). Member - $550, Non-Member - $650, SE - Free Thu, 4/27/2022 - 5/18/2022, 4:00PM - 8:00PM {Virtual} Arc Flash & NFPA 70E Safety Training (Armando Castro) [6 Hrs.] (Days: 2) The course focuses on safety-related work practices, maintenance requirement, and safety requirements for special equipment, as well as establishing an electrically safe work environment, hazard identification, risk assessment, and selecting appropriate Personal Protective Equipment (PPE) lockout/tagout. Member - $250, Non-Member - $350, SE - Free Wed, 1/5/2022 & 1/12/2022, 5:00PM - 8:00PM {Anaheim} Thu, 5/5/2022 & 5/12/2022, 5:00PM - 8:00PM {Anaheim} Cancellation and Refund Policy Cancellation notice must be done via email 72 hours before class start date. continuinged@abcsocal.net. No refunds after the 72 hours. 7

® 2022 Continuing Education For more information. Blueprint Reading for Electricians (Bill Petry) [8 Hrs.] (Days: 2) This course is designed to help recognize and identify basic construction drawing terms, components, symbols, schematic logic, types, and uses of diagrams/schematics, scales, and conversions. Member - $250, Non-Member - $350, SE - Free Thu, 1/6/2022 & 1/13/2022, 5:00PM - 9:00PM {Anaheim} Tue, 4/5/2022 & 4/12/2022, 5:00PM - 9:00PM {Anaheim} Blueprint Reading for Plumbers (TBD) [6 Hrs.] (Days: 2) Understanding the complex process of accurately creating and reading shop drawings, and blueprints; a vital component for increasing productivity. With focus on the manual drafting skills that cannot be replaced by computer software. Member - $250, Non-Member - $350, SE - Does not qualify for free seats~ Mon, 1/3/2022 & 1/10/2022, 5:00PM - 8:00PM {Anaheim} Mon, 3/7/2022 & 3/14/2022, 5:00PM - 8:00PM {Anaheim} Basic Conduit Bending (Sal Scivoli) [8 Hrs.] (Days: 2) The principles taught can be applied to hand or machine bent conduit from 1/2” to 6”. Student will develop an understanding of the relationship of the angles of a right triangle to better understand the formulas used in conduit bending. Must bring you own PPE. Member - $200, Non-Member - $300, SE – Free Tue, 2/15/2022 & 2/22/2022, 5:00PM - 9:00PM {Anaheim} Tue, 6/7/2022 & 6/14/2022, 5:00PM – 9:00PM {Anaheim} Basic Lighting Control (Matthew Strozewski) [4 Hrs.] (Days: 1) This class includes hands-on exercises, the discovery of electricity, relays, and contactors, analog and digital. Learn the scientific properties of light and the terminologies used to describe light. Member - $180, Non-Member - $280, SE – Free Thu, 2/10/2022, 4:30PM - 8:30PM {Anaheim} Thu, 4/14/2022, 4:30PM - 8:30PM {Anaheim} Basic Motor Control (Mike Fonseca) [8 Hrs.] (Days: 2) Covers -NEC motor calculations, General principles of a 2 & 3 wire control circuit, Operation & function of magnetic motor starters. Required Material: *Digital multimeter. Member - $180, Non-Member - $280, SE – Free Wed, 1/12/2022 – 1/19/2022, 5:00PM - 9:00PM {Anaheim} Mon, 5/16/2022 – 5/23/2022, 5:00PM – 9:00PM {Anaheim} Basic Bluebeam Revu (Ken Phelps) [8 hrs.] (Days: 2) This class will cover the basic overview of Bluebeam Revu interface and Navigation, PDF administration, Markup tools, measurement tools, Comparing PDF and Studio Overview. Member - $450, Non-Member - $550, SE – Free Tue & Wed, 2/8/2022 & 2/9/2022, 4:00PM-8PM {Virtual} 8 *SE(Subscribing Employers): ABCSocalmemberswhoemploy apprentices or don’t employ apprentices but pay training fees into theABCSocalMerit TrainingTrust Fundsmaybeeligible for free seats.

January - June Schedule Boom Lift Certification (MEWP) ANSI A92 (Sean Nelson) [4 Hrs.] (Days: 1) This Boom Lift Certification safety training course is ANSI A92 compliant, and presents an overview of safe operating procedures for boom lifts. PPE, long pants, work boots. Member - $300, Non-Member - $400, SE – Free Mon, 1/24/2022, 4:00PM - 8:00PM {Anaheim} Tue, 3/29/2022, 4:00PM - 8:00PM {San Fernando} Building Inspector Certification B-1 Residential (Contractors Business) [24 Hrs.] (Days: 6) 24 hours of live instruction to help you prepare for the ICC B-1 Certification Exam. 2012 International Residential code book, 2015 IRC study companion guide, and code check complete (2nd edition) included. Member - $895, Non-Member - $995 SE ~ Does not qualify for free seats Mon, 1/3/2022- 2/7/2022, 5:00PM - 9:00PM {Virtual} Thu, 5/19/2022 - 6/23/2022, 5:00PM - 9:00PM {Virtual} Bluebeam Revu Takeoff & Estimation (Ken Phelps) [8 Hrs.] (Days: 2) Learn how to use Revu to perform takeoff and estimation tasks efficiently. You’ll learn how to use built-in Revu measurement tools and create your own to perform detailed takeoffs. Member - $450, Non-Member - $550, SE – Free Tue & Wed, 4/19/2022 & 4/20/2022, 4:00PM-8PM {Virtual} Building Inspector Certification B-2 Commercial (Contractors Business) [40 Hrs.] (Days: 5) 40 hrs. of live instruction to help you prepare for the ICC -2 certification exam. 2017 international Building code book, and code check commercial included, IBC turbo tabs tab your book and be ready for the open book exam 2015 IBC study companion guide. Member - $1045, Non-Member - $1145, SE ~Does not qualify for free seats~ Sat, 3/5/2022 - 4/2/2022, 7:00AM - 3:30PM {Virtual} Sat. 5/28/2022 - 6/25/2022, 7:00AM – 3:30PM {Virtual} Competent Person/Excavation Safety (United Academy) [4 Hrs.] (Days: 1) Determine protective systems for excavation operations, and training requirements. Class includes printed manual with OSHA Standards & Visor card. Member - $250, Non-Member - $350 SE - Free Mon, 1/3/2022, 4:00PM - 8:00PM {Virtual} Tue, 4/19/2022, 4:00PM - 8:00PM {Virtual} Computer Fundamentals for Construction Workers (Matthew Strozewski) [6 Hrs.] (Days: 2) Learn day to day computer skills for the job site! Create spreadsheets to keep track of material, finances, and other functionalities. Learn Word document commands. Please bring a laptop computer with word, and excel program to the class. Member - $200, Non-Member - $300, SE – Free Thu, 3/17/2022 & 3/24/2022, 5:00PM - 8:00PM {Anaheim} Thu, 6/23/2022 & 6/30/2022, 5:00PM - 8:00PM {Anaheim} Confined Space (United Academy) [4 Hrs.] (Days: 1) Confined Space Entry Training in compliance with OSHA requirements, the duties of employers and employees, atmospheric conditions, and other areas of interest. Member - $250, Non-Member - $350, SE - Free Mon, 1/17/2022, 4:00PM - 8:00PM {Virtual} Mon, 5/23/2022, 4:00PM - 8:00PM {Virtual} 9

® 2022 Continuing Education For more information. CPR/First Aid with AED (Gary Leigber) [4 Hrs.] (Days: 1) Prepare for the unexpected things in life. With this course, you earn approved 2yr CPR/First Aid certification. This class is intended for anyone with little or no medical training. Member - $100, Non-Member - $200, SE – Free Wed, 1/5/2022, 5:00PM - 9:00PM {Anaheim} Wed, 6/8/2022, 5:00PM - 9:00PM {Anaheim} Estimating 101 (John Hamo) [6 Hrs.] (Days: 2) This class will cover all the basic steps needed when bidding a project. You will learn about all the documents and plans needed and create a checklist for the job walk. You will learn about the basics of digital takeoffs and computerized estimating (not excel). Member - $200, Non-Member $300 SE – Does not qualify for free seats~ Thu, 1/27/2022 & 2/3/2022, 5:00PM – 8:00PM {Anaheim} Thu, 3/3/2022 & 3/10/2022, 5:00PM – 8:00PM {Anaheim} Construction Foremanship (Mark Milne) [6 Hrs.] (Days: 2) The course will help you improve the performance of existing supervisors and introduce new or potential supervisors to many positive aspects of leadership. Includes sexual harassment training. Member - $200, Non-Member - $300 SE – Free Wed, 1/19/2022 & 1/26/2022, 4:00PM - 7:00PM {Virtual} Tue, 4/12/2022 & 4/19/2022, 4:00PM - 7:00PM {Virtual} Contracts Seminar (Theresa Crawford) [3 Hrs.] (Days: 1) Topics include: what is a contract? How do you value the risk? Murder clauses in construction contracts, retention, conduit clause, changes to contract, indemnification/hold harmless, form contracts, and more. Member $75, Non-Member $175, ~ Does not qualify for free SE seats ~ Fri, 1/14/2022, 9:00AM - 12:00PM {Virtual} Contractors Law & Business (Contractors Business) [8 Hrs.] (Days: 2) 2-Four hour evening classes will cover general knowledge of the law and business needed to pass the California Contractors License Examination. A 4 hour seminar will help you sharpen test taking skills, plus a 4 hour basic math reviewwill get you ready for the conversions needed on the trade exam. Class fee includes Law and Business Guide, Trade Guide, Health & Safety DVD with textbook, construction math review DVD with 24 page manual, 90 day access to online tradespecific practice exams and online law & business practice exams, as well as your 1st time contractor bond once you pass the exam. Member - $1095, Non-Member - $1195, SE ~Does not qualify for free seats~ Wed, 2/2/2022 & 2/9/2022 4:00PM- 8:00PM {Anaheim} Mon, 4/4/2022 & 4/11/2022, 4:00PM - 8:00PM {Anaheim} 10 Cancellation and Refund Policy Cancellation notice must be done via email 72 hours before class start date. continuinged@abcsocal.net. No refunds after the 72 hours.

January - June Schedule HVAC Blueprint Reading (Johnny Contreras) [4 Hrs.] (Days: 1) This course introduces blueprints used in construction specific to the heating, ventilation, and air conditioning systems that are likely to be found on the job site. Member - $200, Non-Member - $300, SE – Does not qualify for free seats~ Thu, 2/24/2022, 4:00PM - 8:00PM {Anaheim} Thu, 5/19/2022, 4:00PM - 8:00PM {Anaheim} Intro to General Blue Print Reading (Contractors Business) [24 Hrs.] (Days: 6) 24 hours of in class lecture, print reading for construction book 6th edition, 140 C-size (17’x22’) Foldout prints for residential and commercial construction, review activities at the end of each chapter. Member - $595, Non-Member - $695, SE – Free Mon, 6/6/2022 - 7/18/2022, 4:00PM - 8:00PM {San Fernando} Fall Protection (United Academy) [4 Hrs.] (Days: 1) Learn helpful safety information in construction like different types of active personal fall protection systems, identify fall hazards, and how to properly use fall protection equipment. Class will cover relevant OSHA regulations. Member - $180, Non-Member - $280, SE – Free Thu, 2/10/2022, 4:00PM - 8:00PM {Anaheim} Wed. 6/15/2022, 4:00PM – 8:00PM {San Fernando} Forklift Certification (Rough Terrain) (Sean Nelson) [4 Hrs.] (Days: 1) Learn how to operate this machine for heavy–duty outdoor job sites. The training includes classroom presentation with a written test then hands-on skills testing session. You will get a certification card at the end of the class. PPE, long pants, work boots. Member - $250, Non-Member - $350, SE – Free Tue, 2/22/2022, 4:00PM - 8:00PM {Anaheim} Wed, 4/20/2022, 4:00PM - 8:00PM {San Fernando} Fundamentals of Crew Leadership (Terry Lunt) [12 Hrs.] (Days: 4) This course will cover topics such as the skills you need to be an effective crew leader, the involvement in safety and project control, the importance of a crew leader and their responsibilities. Understanding the workers, how to motivate employees, and how to promote personal growth. Member - $250, Non-Member - $350, SE – Free Tue, 3/1/2022 - 3/22/2022, 5:00PM - 8:00PM {Anaheim} Grounding and Bonding for Electricians (Sal Scivoli) [12 Hrs.] (Days: 4) Fundamentals and purpose of grounding of electrical systems, systems required to be grounded, systems permitted to be grounded, systems not permitted to be grounded, and much more. Textbook included. Member - $300, Non-Member - $400, SE – Free Tue, 1/4/2022 – 1/25/2022, 5:00PM - 8:00PM {Anaheim} Tue, 3/8/2022 – 3/29/2022, 5:00PM - 8:00PM {Anaheim} 11

® 2022 Continuing Education For more information. NEC Review (Rod Wiederspahn) [18 Hrs.] (Days: 6) This course will strengthen your ability to use the national electric code book. Refresh your memory on electrical calculations and code of references for electrical installation. Navigate quickly and efficiently through the NEC code book. Must bring own 2017 code book. Member - $325, Non-Member - $425, ~Does not qualify for free seats~ Tue, 1/4/2022 - 2/8/2022, 5:00PM - 8:00PM {Anaheim} Mon, 4/4/2022 -5/9/2022, 5:00PM - 8:00PM {Anaheim} NEC Review (TBD) [18 Hrs.] (Days: 6) This course will strengthen your ability to use the national electric code book. Refresh your memory on electrical calculations and code of references for electrical installation. Navigate quickly and efficiently through the NEC code book. Must bring own 2017 code book. Member - $325, Non-Member - $425, ~Does not qualify for free seats~ Tue, 2/15/2022 - 3/15/2022, 5:00PM - 8:00PM {San Fernando} Thu, 4/7/2022 - 5/12/2022, 5:00PM -8:00PM {San Fernando} Intro to Low Voltage (John Pinelo) [12 Hrs.] (Days: 3) This course covers the basic principles and concepts of Low Voltage cabling and installations, structured cabling, systemTelecommunications media-codes and standards-best installation practices. On the last day, hands-on training in terminations of RJ45 connectors and patch panels. Member - $250, Non-Member - $350, SE – Does not qualify for free seats Thu, 3/10/2022- 3/24/2022, 5:00PM - 9:00PM {Virtual} Mechanic’s Lien Seminar (Theresa Crawford) [3 Hrs.] (Days: 1) Topics covered are service methods for most construction forms, an overview of completion /cessation of project, preliminary notice, releases, prompt payment penalties, payment bond claims, and other general changes. Member $75, Non-Member $175 ~ Does not qualify for free SE seats Fri, 2/11/2022, 9:00AM - 12:00PM {Virtual} Fri, 4/15/2022, 9:00AM - 12:00PM {Virtual} NEC Calculations (Mike Fonseca) [8 Hrs.] (Days: 2) 8 hours in the following areas & more: Code Section 110.14(C), motors, voltage drop, EGC, conductors, bonding jumpers and equip ground conductors. Member - $300, Non-Member - $400, SE ~Does not qualify for free seats~ Mon, 3/7/2022 & 3/14/2022, 5:00PM - 9:00PM {Anaheim} Wed, 6/15/2022 & 6/22/2022 5:00PM – 9:00PM {Anaheim} 12 *SE(Subscribing Employers): ABCSocalmemberswhoemploy apprentices or don’t employ apprentices but pay training fees into theABCSocalMerit TrainingTrust Fundsmaybeeligible for free seats.

January - June Schedule OSHA 30 (Creation World Safety) [30 Hrs.] (Days: 6) This class is 30 hours and provides OSHA training to workers and gives them information on a variety of general construction safety and health standards. Member - $600, Non-Member - $700, SE – Free Wed, 1/5/2022 - 2/9/2022, 4:00PM - 9:00PM {Virtual} Wed, 3/9/2022 - 4/13/2022, 4:00PM - 9:00PM {Virtual} Tue, 5/24/2022 - 6/28/2022, 4:00PM - 9:00PM {Virtual} Plumbing Code Review for Journeymen (Terry Lunt) [24 Hrs.] (Days: 6) Intense instruction using the 2015 Uniform Plumbing Code Book. The NITC Plumbing Certification exam will be administered at ABC. The exam will be at an additional charge of $116 and you will need to bring a separate check or money order. Member - $325, Non-Member - $425, SE – Does not qualify for free seats~ Tue, 4/26/2022 - 5/31/2022, 5:00PM - 9:00PM {Anaheim} Prevailing Wage Seminar (Carrie Bushman) [2 Hrs.] (Days: 1) The seminar focuses on apprenticeship compliance annualization, working with labor compliance programs, which projects are covered by prevailing wage, and apprenticeship requirements and enforcement. Member - $200, Non-Member - $300 ~ Does not qualify for free seats ~ Thu, 1/20/2022, 8:30AM - 10:30AM {Virtual} Thu, 3/31/2022, 8:30AM - 10:30PM {Virtual} Project Management (Mark Milne) [4 Hrs.] (Days: 1) Introduction to organization theory, the phases of construction, and the role and duties of the supervisor. Learn key tasks such as setting budgets and timelines, providing estimates, and evaluating project goals. Member - $180, Non-Member - $280, SE - Does not qualify for free seats~ Thu, 3/10/2022, 4:00PM - 8:00PM {Virtual} Mon, 5/9/2022, 4:00PM – 8:00PM {Virtual} 13

® 2022 Continuing Education For more information. Quality Control - Project Management (Armando Castro) [3 Hrs.] (Days: 1) Learn the fundamentals of a comprehensive quality control process as it relates to a project and how management and employee can work together to strive for perfection. Learn the eight dimensions of quality, corrective and preventive action, quality assurance, and quality management. Member - $180, Non-Member - $280, SE – Free Wed, 3/23/2022, 5:00PM - 8:00PM {Anaheim} Qualified Rigger & Signal Person (Mark Milne) [8 Hrs.] (Days: 2) Upon completion of this class, you will possess the knowledge needed to operate as a qualified rigger and/or signal person. Participants will understand types of cranes and lift devices, pre-planning a lift, hand voice/radio signaling, fall zones & power lines, load capacities/center of gravity. Member - $300, Non-Member - $400, SE – Free Mon &Wed, 2/14/2022 & 2/16/2022 4:00PM- 8:00PM {Anaheim} Safety Certifications and Recordkeeping (Sean Nelson) [3 Hrs.] (Days: 1) This class covers how to record work related injuries and illnesses on an OSHA 300 log. What safety posters and certifications you must have at a job site. This is mandatory for all employers who have 10 employees or more. This will cover the most common questions. Member - $150, Non-Member - $250, SE – Free Mon, 3/21/2022, 4:00PM - 7:00PM {Virtual} Wed, 6/22/2022, 4:00 PM - 7:00PM {Virtual} Safety Day (Sean Nelson) [8 Hrs.] (Days: 1) Safety certifications include training and certifying your employees to operate mobile elevated work platforms. Scissor lift MEWP ANSI A92, Boom lift MEWP ANSI A92 and Fall Protection. Certification is good for 3 years, limited sitting. Class cost includes continental breakfast and lunch. Check-in is at 6:30 AM must bring PPE, long pants, and work boots. Member - $500, Non-Member - $600, SE - Free, Sat, 2/19/2022, 7:00AM - 3:00PM [8 Hrs.] (Days: 1) {Anaheim} Sat, 4/9/2022, 7:00AM - 3:00PM [8 Hrs.] (Days: 1) {Anaheim} Sat, 6/18/2022, 7:00AM - 3:00PM [8 Hrs.] (Days: 1) {Anaheim} 14 Cancellation and Refund Policy Cancellation notice must be done via email 72 hours before class start date. continuinged@abcsocal.net. No refunds after the 72 hours.

January - June Schedule Scaffolding Safety (Mark Milne) [4 Hrs.] (Days: 1) The class will cover the requirements of CAL/OSHA’S construction safety orders for supported (feet on the ground) scaffolding. The general safety requirements for all scaffolds, planking requirements, fall object protection, footing and bracing, common scaffold safety problems, and electrical hazards Member - $180, Non-Member - $280, SE - Free Tue, 2/1/2022, 4:00PM - 8:00PM {Virtual} Wed, 5/18/2022, 4:00PM - 8:00PM {Virtual} Scissor Lift Certification (MEWP) ANSI A92 (Sean Nelson) [4 Hrs.] (Days: 1) This Scissor Lift Certification safety training course ANSI A92 compliance presents an overview of safe operating procedures for scissor lifts. This course will cover the responsibilities of owners, supervisors, and operators. PPE, long pants, work boots and face covering are required. Member - $250, Non-Member - $350, SE – Free Wed, 3/16/2022, 4:00PM - 8:00PM {Anaheim} Wed, 5/25/2022, 4:00PM - 8:00PM {San Fernando} Skill & Training Workforce (Carrie Bushman) [1 Hrs.] (Days: 1) Identifying the types of projects to which skilled and trained workforce requirements apply, understanding what a skilled and trained workforce, is understanding how to satisfy applicable apprentice graduation requirements reporting, compliance and enforcement. Member - $50, Non-Member - $100 SE – Does not qualify for free seats Thu, 2/17/2022, 8:30AM - 9:30AM {Virtual} Thu, 6/16/2022, 8:30AM - 9:30AM {Virtual} Stake Reading (Matthew Strowzewski) [3 Hrs.] (Days: 1) Class topics include civil engineering history, using 10th scale in surveying, learn how to read civil plans and set a vault, and learn the different color flags. Member - $150, Non-Member - $250, SE – Free Thu, 2/3/2022, 5:00PM - 8:00PM {Anaheim} Thu, 5/12/2022, 5:00PM - 8:00PM {Anaheim} Traffic Control Flagging (Sean Nelson) [4 Hrs.] (Day: 1) Class follows the American Traffic Safety Services Association curriculum. Learn the general guidelines for flagging, appropriate clothing requirements, standards for the signs, barriers and lights and other devices used, and where to position yourself for optimum safety. Member - $180, Non-Member - $280, SE – Free Wed, 2/9/2022 4:00PM- 8:00PM {Virtual} Tue, 4/5/2022 4:00PM- 8:00PM {Virtual} VDV Low Voltage Review (John Pinelo) [12 Hrs.] (Days: 3) Voice Data Video Technician, low voltage certification prep class. Learn testing tips and how to reduce test anxiety, student must bring their own 2017 Code Book. Last class will be in person in Anaheim. Member - $300, Non-Member - $400, SE – Does not qualify for free seats~ Thu, 1/6/2022 - 1/20/2022, 5:00PM - 9:00PM {Virtual} Thu, 5/12/2022 - 5/26/2022, 5:00PM - 9:00PM {Virtual} 15

® 2022 Continuing Education For more information. 16 ABC’S HISTORY AND MILESTONES Founded in 1950 in Baltimore Maryland by six non-union contractors and one union contractor. From that one chapter with seven members, we now have 70 chapters throughout the United States, including Alaska, Hawaii and Guam, with over 21,000 construction contractor and industry related/supporting companies. ABC is the voice of the Merit (Open or Non-union) Shop that represents hundreds of thousands of ABC’s member’s employees. ABC Southern California Chapter existed since 1974. We moved to Chino in 1992. The office had 3,500 square feet of space, which included two classrooms and a lab located in two adjacent buildings, and six staff members to support the chapter and 300 students. In May 1999, ABC SoCal moved to Anaheim into the front building of our complex. In April 2004 we moved into our current training facility and rented 35,000 square feet of space. We purchased this building in 2011, and now have 55,000 square feet of space. We have a total of 11 classrooms a main lab, sheet metal, motor controls and plumbing area for hands on training. We currently have four different trades taught at ABC SoCal. Electrical, Plumbing, Low Voltage and Sheet metal. In 1993, ABC SoCal became one of the first non-union Apprenticeship training programs to be approved in California. Electrical in 1993, Plumbing in 1995 and, EST, HVAC & Sheet Metal in 2011. Since 1993, over 2000 apprentices have graduated from all programs. Each year the number of continuing education classes we offer increase. In 2021 we are offering over 200 continuing education classes, including safety and management classes. ABC SoCal instructors are well trained and dedicated individuals. There are 6,587 NCCER certified instructors and only 42 Master Craft Instructors in the world, which is the highest NCCER instructor certification available. ABC SoCal has 5 of those Master Craft Instructors on staff, more than any other chapter.

January - June Schedule ABC SOCAL STAFF DIRECTORY Accounting Department Dennis Schwartz, Director of Finance...................................................................................................................714-408-7306 Ryon Verb, Senior Accountant.................................................................................................................................714-408-7602 Jennifer Gibb, Jr, Accountant...................................................................................................................................714-408-6080 Continuing Education Ana Hernandez, Continuing Ed Manager............................................................................................................ 714-408-7191 Lawrence Castro, Administrator ............................................................................................................................714-408-7608 Executive Leaders Kevin Garrett, President /CEO................................................................................................................................. 714-779-3199 Doug Sawyer, Executive Vice President............................................................................................................... 714-779-3199 Joanna Montoya, Executive Assistant...................................................................................................................714-408-7150 Government Affairs Russell Johnson, Director of Government Affairs..............................................................................................661-203-1838 Membership Lisa Rockefeller, Director of Membership............................................................................................................714-408-7203 Wendy McGeagh, Member services Manager....................................................................................................714-408-7239 Jennifer Stumph, Communications & Marketing Specialist...........................................................................714-678-6082 Training Department Christina Burdick, Senior Director of Education................................................................................................ 714-779-3187 Douglas Wilson, Training Manager........................................................................................................................714-408-7151 Intake Administrator...................................................................................................................................................714-408-7035 Receptionist.................................................................................................................................................................. 714-779-3199 Klarissa Rose, Apprentice Administrator..............................................................................................................714-408-7205 Delia Galeana, Craft Administrator........................................................................................................................ 714-408-7187 Frank Briseno, Dispatch............................................................................................................................................. 714-408-7172 Gissell Jimenez, OJT...................................................................................................................................................714-408-7554 Chantel Wilmer, ETP Administrator........................................................................................................................714-408-6083 Aaron Viveros, Community Outreach Coordinator...........................................................................................909-331-1548 Benjamin Lozada, Facilities & Supplies managers............................................................................................714-408-7240 San Fernando Office Crystal Chavez, Education Coordinator................................................................................................................818-639-5851 Irene Cruz, Student Intake & Training Assistant.................................................................................................818-639-5856 Linda Contreras, Dispatch and OJT Administrator............................................................................................818-639-5853 Steven Perez, Facilities & Supplies manager....................................................................................................... 818-731-2024 Anaheim 1400 N. Kellogg Dr. Suite A Anaheim CA 92807 San Fernando 12979 Arroyo Ave. San Fernando CA 91340 Riverside 588 Technology Ct. Riverside CA 92507 17

® 2022 Continuing Education For more information. 18 MEET OUR INSTRUCTORS Armando Castro – Instructor Castro has been in the electrical trade for 42 years. With 30 years at Varner and Associates as President of Field Services he joined ABC in 2012. Being an instructor for 9 years as well as a NFPA member and a strong and consistent company owner. Carlos Cervantes – Instructor Cervantes is senior project manager with Mammoth Electric and has been in the trade for 16 years. He attended ABC from 2007 – 2011. He also participated in the craft champs in 2010 and has since gone on to teach for ABC for the past 4 years. For the past 10 years he has been a project manager. Mr. Cervantes attended Cal State Dominguez Hills from 20022006 and received a BA in Studio Art with an emphasis in teaching art to High School Students. Carrie E. Bushman – Carrie is a tenacious Lawyer who provides year-round education for employers throughout Northern California in the area of prevailing wage and apprenticeship, both in public seminars and for individual employers. Carrie is a past board member of the National Association of Women in Construction. She was awarded the American Jurisprudence Award for Community Property. Gary Leigber – Instructor Leigber is owner and operator of K & S AIR with 20 years of experience in the trade as well as 19 years as an instructor with ABC SoCal. He was on the ABC SoCal safety committee for many years and has thoughts of joining it again. His community involvement includes 8 years on little league board of directors with 2 of those years as vice president. Instructor Leigber has also coached soccer and baseball for over 15 years. Johnny Contreras Jr. – Mr. Contreras is a veteran of the United States Army and has been an instructor for 7 years. He is Senior Project Manager for Christian Brothers Mechanical Services and has been in the trade for 37 years. John Hamo – John Hamo started in the electrical trade in 1987 and has held every position from helper, Journeyman, master electrician, estimator and project manager. He has been owner and CEO of Cemco Electric Inc since 1992. John started as an instructor with ABC in January 2021 to give back to the industry, but has been teaching his employees the trade for over 28 years. John has been deeply involved in ABC for over 25 years, serving on multiple committees as well as Chairman of the Board of Directors. He has also served on the National Board of Directors. He is an active member of the IAEI (International Association of Electrical Inspectors) since 1992 and served on the Grounding and Bonding Committee for the IAEI. John’s passion is teaching and mentoring others in the trade, to see them grow and flourish. John A. Pinelo Sr. – Instructor Pinelo has been in the electrical/low voltage industry for 31 years. He is currently the Director of sales for Federal Technology Solutions. Besides being a 7-year instructor for ABC SoCal instructor Pinelo also holds the honor of being an instructor of the year recipient. His involvement with ABC and the community includes, Craft Champs Committee, NCCER SME EST, and Sound Committee for the State, BICSI Mentor Program and Local Church Volunteer. Kevin Ross Jr. – Mr. Ross is Project Safety Manager for Creation Safety World. He has been in the trade for 16 years and an instructor for 15 years. Mr. Ross has a Bachelors from UC Berkley and a HR Manager certificate from Loyola. He has also been a teacher and trainer of the year for LACC and a Craft Champion inspector and judge. In addition to working with various colleges and providing on the job training and placement Mr. Ross is a board member on the ABC safety committee as well as AGC and SCCA. He is also involved in his church and helping out the homeless and underprivileged youth and adults in Los Angeles.

January - June Schedule 19 Mark Milne – Instructor Milne has 20 years of electrical experience and has been teaching for 13 years. Currently he is working for Helix Electric Inc., as Regional Safety Manager. He also has CA teaching credentials in Career Technical Education, Building Trades & Construction and Energy & Utilities. Instructor Milne is also a NFPA Certified Safety Compliance Professional, NCCER Certified Instructor, Master electrician and Certified Level 1 Crane Rigger Signalperson Instructor. Matthew Strozewski – Instructor Strozewski is a 2001 graduate of ABC and has been in the industry for 34 years. He is currently Project Engineer, Title 24 ATT and assistant to foreman and PM’s for Sunwest Electric Inc. Since graduating instructor Strozewski has spent the last 6 years teaching for ABC SoCal. He also is involved in the community having taught Jr. High Sunday school for 10 years as well as being the prop maker for his church. Instructor Strozewski also has the honor of being the Craft Champion for the year 2000. Michael Fonseca- Instructor Fonseca is currently working for Tiger Electric. He is an Account manager with 25 years of experience. He was a Lead Electrical Instructor for ABC for 12 years. He was a Craft Champ participant in 2003. He was part of the ABC Craft Champ Committee, ABC Outreach, Student Advisory, and Instructor Onboarding/Training. Rod Wiederspahn – Instructor Wiederspahn has 47 years of experience in the electrical trade while spending 33 years with Sunwest Electric. Currently project manager with Sunwest he has been an ABC instructor for 28 years. In 1980 he began his training at the ABC Rocky Mountain Chapter and moved to southern California in 1988. He began teaching craft training at ABC SoCal in 1992 and was on the ECTC committee from 1993-2016. Instructor Wiederspahn is also a NCCER certified master craft instructor, OSHA 10 certified and has been on the craft championship committee since 2000. Saul Aquino – Instructor Aquino has 14 years of experience in the electrical trade. He currently works for AMTEK construction as a Foreman. He has been an ABC instructor for 3 year and 2 years as a lab tech. He is a proud winner of our annual Craft Championship. Instructor Aquino is a member of the Crafts Champ committee. Salvatore Scivoli – Mr. Salvatore has been in the Electrical trade for 25 years. He has been an ABC Instructor for 3 years. He is a foreman at Freedom Forever Solar. He is a member of the ABC Foreman Task Force. Sean Nelson – Instructor Nelson has 19 years of experience in the safety field. Currently working for Priority Safety with 19 years as an instructor in safety. He is also safety instructor for ABC SoCal including boom and scissor lift, forklift, traffic and scaffold safety. He and his family are big on volunteering and are a part of worldwide volunteer work which assists communities affected by natural disasters as well as assisting those with medical issues and missionary work. Terry Lunt- Instructor Lunt has been in the trade for 41 years and is currently the Water Service Leadsman for Ontario Montclair School District. Mr. Lunt has been teaching for 15 years and is a plumbing master craft instructor. He is also a subject matter expert with NCCER and holds a California teaching credential in vocational education. Mr. Lunt is a member of the ABC Craft Championship Committee and the ABC Foreman Task Force. In his personal time Mr. Lunt also serves on the Providence Children’s Home Committee Kenya, Africa. Theresa Crawford Tate – Ms. Tate is the managing partner of the firm of Crawford & Bangs. Her areas of practice Include construction law, contracts, corporate and business law. Ms. Tate graduated with honors from both the California State University at Fullerton and Loyola Law School. Ms. Tate is admitted to practice before all the state courts of California and the U.S. District Court for the Central District. She is a member of the State Bar of California and Los Angeles County Bar Association. She teaches various topics, including: Mechanic Lien Basics; Advanced Mechanic’s Liens. William Petry – Instructor Petry has been in the electrical trade for 35 years. He is currently the Public Works Superintendent for the City of Pasadena. Instructor Petry has been teaching for ABC SoCal for 6-years and has earned the DIR certificate of Merit. His involvement in the community also includes the community emergency response team or C.E.R.T. for the city of Ontario and he is a registered service worker for the City of Pasadena Emergency Operation Center or EOC.

® Stay Connected join us on social media Follow ABC SoCal on twitter @abcsocal1 to keep up to date on the latest information. Follow ABC SoCal on LinkedIn to stay informed and meet industry professionals. Search: Associated Builders and Contractors of Southern California Follow ABC SoCal on Instagram @abcsocal see updates and current events. Find ABC SoCal on Flickr www.flickr.com/photos/abcsocal to see event photos. ABC SOCAL LOCATIONS Anaheim 1400 Kellogg Dr., Suite A Anaheim, CA 92807 Los Angeles 12979 Arroyo Ave. San Fernando, CA 91340 Riverside 588 Technology Ct. Riverside, CA 92507 Follow ABC SoCal on facebook @facebook.com/abcsocal ® Stay Connected join us on social media F llow ABC So l t itter @abcsocal1 to keep up to date on the latest information. Follow ABC SoCal on LinkedIn to stay informed and meet industry professionals. Search: Associated Builders and Contractors of Southern California Follow ABC SoCal on Instagram @abcsocal see updates and current events. Find ABC SoCal on Flickr www.flickr.com/photos/abcsocal to see event photos. ABC SOCAL LOCATIONS Anaheim 1400 Kellogg Dr., Suite A Anaheim, CA 92807 Los Angeles 12979 Arroyo Ave. San Fernando, CA 91340 Riverside 588 Technology Ct. Riverside, CA 92507 Follow ABC SoCal on facebook @facebook.com/abcsocal

RkJQdWJsaXNoZXIy MzM2NTU=